Crankshaft Archives - Rodavictoria USA

SKF 99334 Engine Crankshaft Speedi-Sleev 84.963 mm ID

María Graterol — Sat, 04 Apr 2026 11:22:41 +0000

Description:

Brand: SKF
Item Number: 99334 SKF
EAN: 85311902441
Category: CR Axle Repair / Seal
Product Type: Speedi-Sleeve
Material: Stainless Steel
Product ID: 10248536
Customs Tariff Number: 8484 1000

Inner Diameter (d): 84.963 mm
Inner Diameter (d): 3.346 in
Outer Diameter (D): 90.932 mm
Width: 10.135 mm

Weight: 0.1242 kg

Country of Origin: United States

PACKAGE INCLUDES: ONE (1) SKF Speedi-Sleeve 99334

Buy With Confidence!! We have more size available Please check out our Store.
Most Order Will Processed With In 24 Hours or less
All Product Photos For Reference Only , Actual Quantity Depend On your Order !!
Returns Accepted Bearing Must Be Sealed In Original Packaging!!
No instruction is Included, Professional Installation is Recommended
Please Note Our Best Offer Option Is For Customers Interested In Bulk Quantities
If You Have Any Issues Please Contact Us Before Opening A CASE , We Will Be More Than Happy To Assist You !!

Delivery Information

Please double check shipping address . We are not responsible for incorrect or undeliverable address.
We will ship item locally for US and Canada buyers.
For Canada buyes, it will take about 9-15 days to reach, sometimes it take longer time to reach Canada.
If you don’t get it, please contact us firstly, we’ll try our best to support you.
For US customers, all items will be shipped out same business day with cleared payment by 4pm.
Please included your phone number to the payment note for prompt and secure shipment.
Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.
All sales ship to address registered with Ebay at the time of the sale.

Contact Us

If you have any concerns or questions, please do not hesitate to contact us through ebay messages

The post SKF 99334 Engine Crankshaft Speedi-Sleev 84.963 mm ID appeared first on Rodavictoria USA.

SKF 99210 Engine Crankshaft Speedi-Sleev 2 1/8″ ID

María Graterol — Sat, 04 Apr 2026 11:15:58 +0000

Description:

Brand: SKF
Item Number: 99210
Also Known As: CR99210
EAN: 85311041751
Category: CR Axle Repair / Seal (Speedi-Sleeve)

Material: Stainless Steel
Country of Origin: United States
Customs Tariff Number: 8484 1000

Dimensions:

Inner Diameter (ID): 53.975 mm (2.125 in)
Outer Diameter (OD): 61.52 mm
Width: 19.05 mm
Weight: 0.075 kg

Description:
The SKF 99210 Speedi-Sleeve is a stainless steel repair sleeve designed to restore worn shaft surfaces. It provides a smooth, hardened surface for seals to run on, helping prevent leaks and extending the life of the shaft. Ideal for quick, cost-effective shaft repair in automotive, agricultural, and industrial applications.

PACKAGE INCLUDES: ONE (1) SKF Speedi-Sleeve 99210

Buy With Confidence!! We have more size available Please check out our Store.
Most Order Will Processed With In 24 Hours or less
All Product Photos For Reference Only , Actual Quantity Depend On your Order !!
Returns Accepted Bearing Must Be Sealed In Original Packaging!!
No instruction is Included, Professional Installation is Recommended
Please Note Our Best Offer Option Is For Customers Interested In Bulk Quantities
If You Have Any Issues Please Contact Us Before Opening A CASE , We Will Be More Than Happy To Assist You !!

Delivery Information

Please double check shipping address . We are not responsible for incorrect or undeliverable address.
We will ship item locally for US and Canada buyers.
For Canada buyes, it will take about 9-15 days to reach, sometimes it take longer time to reach Canada.
If you don’t get it, please contact us firstly, we’ll try our best to support you.
For US customers, all items will be shipped out same business day with cleared payment by 4pm.
Please included your phone number to the payment note for prompt and secure shipment.
Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.
All sales ship to address registered with Ebay at the time of the sale.

Contact Us

If you have any concerns or questions, please do not hesitate to contact us through ebay messages

The post SKF 99210 Engine Crankshaft Speedi-Sleev 2 1/8″ ID appeared first on Rodavictoria USA.

SKF 99155 Engine Crankshaft Speedi-Sleev 39.42 mm ID

María Graterol — Sat, 04 Apr 2026 11:09:04 +0000

Description:

Brand: SKF

Item Number: 99155

EAN: 85311041416

Product Type: Speedi-Sleeve / CR Axle Repair Sleeve

Category: CR Axle Repair / Seal

Material: Stainless Steel

Inner Diameter (ID): 39.42 mm

Outer Diameter (OD): 47.20 mm

Width: 14.30 mm

Inner Diameter (ID) Inch: 1.552 in

Outer Diameter (OD) Inch: 1.8583 in

Weight: 0.07 kg

Country of Origin: United States

Description:
High-quality SKF 99155 Speedi-Sleeve designed to provide a fast and effective repair solution for worn or grooved shaft surfaces. Made from stainless steel, this repair sleeve helps restore the sealing surface without requiring costly shaft replacement or machining. It is ideal for extending equipment life and improving seal performance in automotive, agricultural, and industrial applications.

Features:

Durable stainless steel construction
Repairs worn shaft sealing surfaces
Helps reduce leakage and premature seal wear
Quick and cost-effective shaft repair solution
Reliable SKF quality

Common Applications:
Suitable for shaft repair, axle repair, and seal surface restoration in automotive, commercial vehicle, agricultural, and industrial equipment applications.

PACKAGE INCLUDES: ONE (1) SKF Speedi-Sleeve 99155

Buy With Confidence!! We have more size available Please check out our Store.
Most Order Will Processed With In 24 Hours or less
All Product Photos For Reference Only , Actual Quantity Depend On your Order !!
Returns Accepted Bearing Must Be Sealed In Original Packaging!!
No instruction is Included, Professional Installation is Recommended
Please Note Our Best Offer Option Is For Customers Interested In Bulk Quantities
If You Have Any Issues Please Contact Us Before Opening A CASE , We Will Be More Than Happy To Assist You !!

Delivery Information

Please double check shipping address . We are not responsible for incorrect or undeliverable address.
We will ship item locally for US and Canada buyers.
For Canada buyes, it will take about 9-15 days to reach, sometimes it take longer time to reach Canada.
If you don’t get it, please contact us firstly, we’ll try our best to support you.
For US customers, all items will be shipped out same business day with cleared payment by 4pm.
Please included your phone number to the payment note for prompt and secure shipment.
Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.
All sales ship to address registered with Ebay at the time of the sale.

Contact Us

If you have any concerns or questions, please do not hesitate to contact us through ebay messages

The post SKF 99155 Engine Crankshaft Speedi-Sleev 39.42 mm ID appeared first on Rodavictoria USA.

SKF 99386 Engine Crankshaft Speedi-Sleeve 98.32 mm ID

María Graterol — Sat, 04 Apr 2026 10:56:26 +0000

Description:

Brand: SKF

Item Number: 99386

EAN:

Product Type: CR Axle Repair / Seal

Category: Axle Repair / Seal

Country of Origin: United States

Inner Diameter (ID): 98.32 mm

Inner Diameter (ID) Inch: 3.871 in

Weight: 0.213 kg

Description:
High-quality SKF 99386 CR Axle Repair / Seal designed to help restore proper sealing surfaces and improve sealing performance in axle applications. Built for dependable operation and long service life, this repair solution is suitable for automotive and industrial applications where worn shaft surfaces can cause leakage and premature seal failure.

Features:

Designed for axle repair and sealing applications
Helps restore sealing surface integrity
Reliable SKF quality
Suitable for repair and maintenance work
Durable construction for long service life

Common Applications:
Suitable for axle repair, shaft surface restoration, and seal replacement applications in automotive, commercial vehicle, and industrial equipment systems.

SPEEDI-SLEEVE

The SKF SPEEDI-SLEEVE offers a quick and efficient solution to restore worn shafts. Faster than demetallizing or regrinding, it enhances the sealing system by creating an ideal surface for seals. In contrast to many common regrinding methods—which often yield surfaces that are difficult to seal—the outside finish of a SPEEDI-SLEEVE is optimized for this purpose.

With a standard size range accommodating shafts from 12 mm to 200 mm (.472” to 8”), each sleeve is made of high-grade stainless steel, is only 0.28 mm (0.011”) thick, and features a wear-resistant surface with a finish of Ra 0.25–0.5 µm (10–20 µin). Installation requires no expensive preparation or machining—just a few minutes reduces downtime significantly.

These thin-walled stainless steel sleeves are a reliable fix when a crankshaft needs a renewed sealing surface. Not only do they cost less, but installation is fast and straightforward, producing a surface harder than a new shaft. The same size seal as the original will fit snugly over the newly restored surface, and every SPEEDI-SLEEVE comes with a disposable installation tool.

Though the installation process is simple, care and attention are required to ensure optimal results. Every kit includes an installation tool.

# How to Install an SKF SPEEDI-SLEEVE

Clean the seal counter face on the shaft and smooth out any burrs or rough spots.
Measure the diameter at the location where the sleeve will be positioned, averaging readings from three different points to confirm it meets specifications. If measurements are within the recommended range, the sleeve will press-fit securely without the need for adhesive.
Determine and mark the exact position for the sleeve so it covers the worn area rather than just sitting flush with the shaft end.
Shallow grooves don’t require filling; optionally apply a light coat of non-hardening sealant inside the sleeve if desired, but remove any excess.
For deep scoring, fill grooves with a powdered metal epoxy before installing the sleeve, allowing installation to wipe away any surplus. Clean off residual filler from the outside surface.
Position the flange end first onto the shaft, then use the provided installation tool to fit the sleeve.
Gently tap the center of the tool until the sleeve fully covers the worn section. If needed, use a similarly sized pipe or tubing with a smooth, squared-off edge. Avoid scratching the precision ground surface.
Leave the flange intact unless necessary for clearance. If removal is required, cut along the tear-off groove with metal shears, bend or twist the flange off, being careful not to damage the sleeve.
After installation, check for burrs again.

Lubricate the sleeve with the appropriate medium prior to installing the seal.
Proceed with mounting the seal.

# Determining the Correct Size

Clean the shaft thoroughly and measure the undamaged section of the seal counter face at least three times along different planes. Use the average value to select the correct SKF Sepedi-Sleeve size. If your measurement falls within the permissible product table range, the sleeve will fit tightly without needing adhesive.

PACKAGE INCLUDES: ONE (1) SKF Speedi-Sleeve 99386

Buy With Confidence!! We have more size available Please check out our Store.
Most Order Will Processed With In 24 Hours or less
All Product Photos For Reference Only , Actual Quantity Depend On your Order !!
Returns Accepted Bearing Must Be Sealed In Original Packaging!!
No instruction is Included, Professional Installation is Recommended
Please Note Our Best Offer Option Is For Customers Interested In Bulk Quantities
If You Have Any Issues Please Contact Us Before Opening A CASE , We Will Be More Than Happy To Assist You !!

Delivery Information

Please double check shipping address . We are not responsible for incorrect or undeliverable address.
We will ship item locally for US and Canada buyers.
For Canada buyes, it will take about 9-15 days to reach, sometimes it take longer time to reach Canada.
If you don’t get it, please contact us firstly, we’ll try our best to support you.
For US customers, all items will be shipped out same business day with cleared payment by 4pm.
Please included your phone number to the payment note for prompt and secure shipment.
Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.
All sales ship to address registered with Ebay at the time of the sale.

Contact Us

If you have any concerns or questions, please do not hesitate to contact us through ebay messages

The post SKF 99386 Engine Crankshaft Speedi-Sleeve 98.32 mm ID appeared first on Rodavictoria USA.

SKF USA 99141 Engine Crankshaft Repair SPEEDI-SLEEVE ID 31.5 mm

María Graterol — Mon, 28 Oct 2024 10:35:59 +0000

Description:

- Brand SKF
- Item Number99141 SKF
- EAN85311041331
- Category CR Axle Repair / Seal
Weight and Dimensions
- Inner (d) MM31,5
- Inner (d) Inch1.24
- Weight (kg)0.046

The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed

“SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. “

“Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. “

While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve

Here’s how to install an SKF SPEEDI-SLEEVE

1 Clean the seal counter surface on the shaft. File down any burrs or rough spots.

2 Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft. Measure in three positions and average the readings (to make sure the shaft is within recommended specifications). If the mean diameter is within the range for a given sleeve size, there is sufficient press fit built into the sleeve to prevent it from sliding or spinning without using an adhesive.

3 Determine where the sleeve must be positioned to cover the seal wear track. Measure to the exact point, or mark directly on the surface. The sleeve must be placed over the worn area, not just bottomed or left flush with the end of the shaft.

4 Shallow wear grooves do not require filling. Optionally, a light layer of a non-hardening sealant, e.g. Loctite 209, can be applied to the inside diameter surface of the sleeve. Clean away sealant that migrates to the shaft or sleeve outside diameter surface.

5 If the shaft is deeply scored, fill the groove with a powdered metal epoxy type filler. Install the sleeve before the filler hardens, allowing the sleeve to wipe off any excess filler. Clean away any remaining filler from the sleeve outside diameter surface.

6 The flange end of the sleeve goes on the shaft first. Then place the installation tool over the sleeve.

7 Gently tap the center of the installation tool until the sleeve covers the seal worn surface. If the installation tool is too short, a length of pipe or tubing with a squared-off, burr-free end can be used. Be sure that the inside diameter of the pipe is the same as that of the installation tool. Use care not to scratch the precision ground sleeve outside diameter.

8 Leave the flange intact unless clearance is needed. If the flange is to be removed cut the flange perpendicular to the tear-off groove with a metal shear. Cut only into the tear-off groove, not onto the finished sleeve surface. After positioning the sleeve, use standard pliers to bend the flange back and forth around its circumference and along the shaft axis. The flange will break loose along the tear-off groove. Alternately, grasp the flange away from the seal surface and twist it into a coil.

9 After the sleeve is installed, check again for burrs, which could damage the seal.

10 Lubricate the sleeve with the system medium before installing the sleeve.

11 Proceed with the seal installation.

How to determine the size you need.

To determine the appropriate sleeve size, it is first necessary to clean the shaft carefully. The diameter of an undamaged section of the seal counterface should then be measured on at least three different planes. The arithmetical mean of these measurements determines the size of SKF Speedi-Sleeve. If the value lies within the permissible range listed in the product table for the shaft diameter, SKF Speedi-Sleeve will have an adequate tight fit on the shaft and will not require an adhesive.

Package Include: ONE SKF SPEEDI-SLEEVE 99141

The post SKF USA 99141 Engine Crankshaft Repair SPEEDI-SLEEVE ID 31.5 mm appeared first on Rodavictoria USA.

SKF USA 99317 ENGINE CRANKSHAFT REPAIR SPEEDI-SLEEVE 79.984 x 89.992 x 15.011 mm

María Graterol — Sun, 18 Feb 2024 11:09:10 +0000

Description:

Product characteristics
Category:Speedi-sleeves
Material:Stainless steel
Weight:0,093 kg
ProductID:10248533
Country of origin:United States
Customs tariff number:8484 1000
Dimensions
Inner dimension: 79,984 mm
Outer dimension: 89,992 mm
Width: 15,011 mm

SPEEDI-SLEEVE

The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed

The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes

“SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. “

“Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. “

While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve

Here’s how to install an SKF SPEEDI-SLEEVE

1 Clean the seal counter surface on the shaft. File down any burrs or rough spots.

2 Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft. Measure in three positions and average the readings (to make sure the shaft is within recommended specifications). If the mean diameter is within the range for a given sleeve size, there is sufficient press fit built into the sleeve to prevent it from sliding or spinning without using an adhesive.

3 Determine where the sleeve must be positioned to cover the seal wear track. Measure to the exact point, or mark directly on the surface. The sleeve must be placed over the worn area, not just bottomed or left flush with the end of the shaft.

4 Shallow wear grooves do not require filling. Optionally, a light layer of a non-hardening sealant, e.g. Loctite 209, can be applied to the inside diameter surface of the sleeve. Clean away sealant that migrates to the shaft or sleeve outside diameter surface.

5 If the shaft is deeply scored, fill the groove with a powdered metal epoxy type filler. Install the sleeve before the filler hardens, allowing the sleeve to wipe off any excess filler. Clean away any remaining filler from the sleeve outside diameter surface.

6 The flange end of the sleeve goes on the shaft first. Then place the installation tool over the sleeve.

7 Gently tap the center of the installation tool until the sleeve covers the seal worn surface. If the installation tool is too short, a length of pipe or tubing with a squared-off, burr-free end can be used. Be sure that the inside diameter of the pipe is the same as that of the installation tool. Use care not to scratch the precision ground sleeve outside diameter.

8 Leave the flange intact unless clearance is needed. If the flange is to be removed cut the flange perpendicular to the tear-off groove with a metal shear. Cut only into the tear-off groove, not onto the finished sleeve surface. After positioning the sleeve, use standard pliers to bend the flange back and forth around its circumference and along the shaft axis. The flange will break loose along the tear-off groove. Alternately, grasp the flange away from the seal surface and twist it into a coil.

9 After the sleeve is installed, check again for burrs, which could damage the seal.

10 Lubricate the sleeve with the system medium before installing the sleeve.

11 Proceed with the seal installation.

How to determine the size you need.

To determine the appropriate sleeve size, it is first necessary to clean the shaft carefully. The diameter of an undamaged section of the seal counterface should then be measured on at least three different planes. The arithmetical mean of these measurements determines the size of SKF Speedi-Sleeve. If the value lies within the permissible range listed in the product table for the shaft diameter, SKF Speedi-Sleeve will have an adequate tight fit on the shaft and will not require an adhesive.

Package Include: ONE SKF SPEEDI-SLEEVE 99317

The post SKF USA 99317 ENGINE CRANKSHAFT REPAIR SPEEDI-SLEEVE 79.984 x 89.992 x 15.011 mm appeared first on Rodavictoria USA.

SKF USA 99387 Engine Crankshaft Repair Speedi-Sleeve and Tool Kit 3.873×0.813″

María Graterol — Sat, 10 Feb 2024 14:38:00 +0000

Description:

Product characteristics

Category: Speedi-sleeves

Material: Stainless steel

Weight: 0,263 kg

ProductID: 10248548

Country of origin: United States

Customs tariff number: 8484 1000

Dimensions

Inner dimension: 98,450 mm

Width: 20,650 mm

Here’s how to install an SKF SPEEDI-SLEEVE

1 Clean the seal counter surface on the shaft. File down any burrs or rough spots.

2 Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft. Measure in three positions and average the readings (to make sure the shaft is within recommended specifications). If the mean diameter is within the range for a given sleeve size, there is sufficient press fit built into the sleeve to prevent it from sliding or spinning without using an adhesive.

3 Determine where the sleeve must be positioned to cover the seal wear track. Measure to the exact point, or mark directly on the surface. The sleeve must be placed over the worn area, not just bottomed or left flush with the end of the shaft.

4 Shallow wear grooves do not require filling. Optionally, a light layer of a non-hardening sealant, e.g. Loctite 209, can be applied to the inside diameter surface of the sleeve. Clean away sealant that migrates to the shaft or sleeve outside diameter surface.

5 If the shaft is deeply scored, fill the groove with a powdered metal epoxy type filler. Install the sleeve before the filler hardens, allowing the sleeve to wipe off any excess filler. Clean away any remaining filler from the sleeve outside diameter surface.

6 The flange end of the sleeve goes on the shaft first. Then place the installation tool over the sleeve.

7 Gently tap the center of the installation tool until the sleeve covers the seal worn surface. If the installation tool is too short, a length of pipe or tubing with a squared-off, burr-free end can be used. Be sure that the inside diameter of the pipe is the same as that of the installation tool. Use care not to scratch the precision ground sleeve outside diameter.

8 Leave the flange intact unless clearance is needed. If the flange is to be removed cut the flange perpendicular to the tear-off groove with a metal shear. Cut only into the tear-off groove, not onto the finished sleeve surface. After positioning the sleeve, use standard pliers to bend the flange back and forth around its circumference and along the shaft axis. The flange will break loose along the tear-off groove. Alternately, grasp the flange away from the seal surface and twist it into a coil.

9 After the sleeve is installed, check again for burrs, which could damage the seal.

10 Lubricate the sleeve with the system medium before installing the sleeve.

11 Proceed with the seal installation.

How to determine the size you need.

To determine the appropriate sleeve size, it is first necessary to clean the shaft carefully. The diameter of an undamaged section of the seal counterface should then be measured on at least three different planes. The arithmetical mean of these measurements determines the size of SKF Speedi-Sleeve. If the value lies within the permissible range listed in the product table for the shaft diameter, SKF Speedi-Sleeve will have an adequate tight fit on the shaft and will not require an adhesive.

Package Includes:

One (1) SKF USA 99387

The post SKF USA 99387 Engine Crankshaft Repair Speedi-Sleeve and Tool Kit 3.873×0.813″ appeared first on Rodavictoria USA.

SKF USA 99387 Eengine Crankshaft Repair Speedi-Sleeve and Tool Kit 98.45×20.65 mm

María Graterol — Sat, 10 Feb 2024 14:31:00 +0000

Description:

Product characteristics

Category: Speedi-sleeves

Material: Stainless steel

Weight: 0,263 kg

ProductID: 10248548

Country of origin: United States

Customs tariff number: 8484 1000

Dimensions

Inner dimension: 98,450 mm

Width: 20,650 mm

Here’s how to install an SKF SPEEDI-SLEEVE

1 Clean the seal counter surface on the shaft. File down any burrs or rough spots.

2 Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft. Measure in three positions and average the readings (to make sure the shaft is within recommended specifications). If the mean diameter is within the range for a given sleeve size, there is sufficient press fit built into the sleeve to prevent it from sliding or spinning without using an adhesive.

3 Determine where the sleeve must be positioned to cover the seal wear track. Measure to the exact point, or mark directly on the surface. The sleeve must be placed over the worn area, not just bottomed or left flush with the end of the shaft.

4 Shallow wear grooves do not require filling. Optionally, a light layer of a non-hardening sealant, e.g. Loctite 209, can be applied to the inside diameter surface of the sleeve. Clean away sealant that migrates to the shaft or sleeve outside diameter surface.

5 If the shaft is deeply scored, fill the groove with a powdered metal epoxy type filler. Install the sleeve before the filler hardens, allowing the sleeve to wipe off any excess filler. Clean away any remaining filler from the sleeve outside diameter surface.

6 The flange end of the sleeve goes on the shaft first. Then place the installation tool over the sleeve.

7 Gently tap the center of the installation tool until the sleeve covers the seal worn surface. If the installation tool is too short, a length of pipe or tubing with a squared-off, burr-free end can be used. Be sure that the inside diameter of the pipe is the same as that of the installation tool. Use care not to scratch the precision ground sleeve outside diameter.

8 Leave the flange intact unless clearance is needed. If the flange is to be removed cut the flange perpendicular to the tear-off groove with a metal shear. Cut only into the tear-off groove, not onto the finished sleeve surface. After positioning the sleeve, use standard pliers to bend the flange back and forth around its circumference and along the shaft axis. The flange will break loose along the tear-off groove. Alternately, grasp the flange away from the seal surface and twist it into a coil.

9 After the sleeve is installed, check again for burrs, which could damage the seal.

10 Lubricate the sleeve with the system medium before installing the sleeve.

11 Proceed with the seal installation.

How to determine the size you need.

To determine the appropriate sleeve size, it is first necessary to clean the shaft carefully. The diameter of an undamaged section of the seal counterface should then be measured on at least three different planes. The arithmetical mean of these measurements determines the size of SKF Speedi-Sleeve. If the value lies within the permissible range listed in the product table for the shaft diameter, SKF Speedi-Sleeve will have an adequate tight fit on the shaft and will not require an adhesive.

Package Includes:

One (1) SKF USA 99387

The post SKF USA 99387 Eengine Crankshaft Repair Speedi-Sleeve and Tool Kit 98.45×20.65 mm appeared first on Rodavictoria USA.

SKF USA 99362 ENGINE CRANKSHAFT REPAIR SPEEDI-SLEEVE 92.1×20.65mm

María Graterol — Sat, 10 Feb 2024 14:24:21 +0000

Description:

Product characteristics

Category:Speedi-sleeves

Material:Stainless steel

Weight:0,200 kg

ProductID:10248544

Country of origin:United States

Customs tariff number:8484 1000

Dimensions

Inner dimension: 92,100 mm

Width: 20,650 mm

SPEEDI-SLEEVE

The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed

The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes

“SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. “

“Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. “

While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve

Here’s how to install an SKF SPEEDI-SLEEVE

1 Clean the seal counter surface on the shaft. File down any burrs or rough spots.

2 Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft. Measure in three positions and average the readings (to make sure the shaft is within recommended specifications). If the mean diameter is within the range for a given sleeve size, there is sufficient press fit built into the sleeve to prevent it from sliding or spinning without using an adhesive.

3 Determine where the sleeve must be positioned to cover the seal wear track. Measure to the exact point, or mark directly on the surface. The sleeve must be placed over the worn area, not just bottomed or left flush with the end of the shaft.

4 Shallow wear grooves do not require filling. Optionally, a light layer of a non-hardening sealant, e.g. Loctite 209, can be applied to the inside diameter surface of the sleeve. Clean away sealant that migrates to the shaft or sleeve outside diameter surface.

5 If the shaft is deeply scored, fill the groove with a powdered metal epoxy type filler. Install the sleeve before the filler hardens, allowing the sleeve to wipe off any excess filler. Clean away any remaining filler from the sleeve outside diameter surface.

6 The flange end of the sleeve goes on the shaft first. Then place the installation tool over the sleeve.

7 Gently tap the center of the installation tool until the sleeve covers the seal worn surface. If the installation tool is too short, a length of pipe or tubing with a squared-off, burr-free end can be used. Be sure that the inside diameter of the pipe is the same as that of the installation tool. Use care not to scratch the precision ground sleeve outside diameter.

8 Leave the flange intact unless clearance is needed. If the flange is to be removed cut the flange perpendicular to the tear-off groove with a metal shear. Cut only into the tear-off groove, not onto the finished sleeve surface. After positioning the sleeve, use standard pliers to bend the flange back and forth around its circumference and along the shaft axis. The flange will break loose along the tear-off groove. Alternately, grasp the flange away from the seal surface and twist it into a coil.

9 After the sleeve is installed, check again for burrs, which could damage the seal.

10 Lubricate the sleeve with the system medium before installing the sleeve.

11 Proceed with the seal installation.

How to determine the size you need.

To determine the appropriate sleeve size, it is first necessary to clean the shaft carefully. The diameter of an undamaged section of the seal counterface should then be measured on at least three different planes. The arithmetical mean of these measurements determines the size of SKF Speedi-Sleeve. If the value lies within the permissible range listed in the product table for the shaft diameter, SKF Speedi-Sleeve will have an adequate tight fit on the shaft and will not require an adhesive.

Package Include : ONE SPEEDI-SLEEVE 99362

The post SKF USA 99362 ENGINE CRANKSHAFT REPAIR SPEEDI-SLEEVE 92.1×20.65mm appeared first on Rodavictoria USA.

SKF USA 99376 ENGINE CRANKSHAFT REPAIR SPEEDI-SLEEVE 95,225×102,235×14,300mm

María Graterol — Sat, 10 Feb 2024 14:20:05 +0000

Description:

Product characteristics
Category:Speedi-sleeves
Material:Stainless steel
Weight:0,231 kg
ProductID:10244634
Country of origin:United States
Customs tariff number:8484 1000
Dimensions
Inner dimension: 95,225 mm
Outer dimension: 102,235 mm
Width: 14,300 mm

SPEEDI-SLEEVE

The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed

The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes

“SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. “

“Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. “

While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve

Here’s how to install an SKF SPEEDI-SLEEVE

1 Clean the seal counter surface on the shaft. File down any burrs or rough spots.

2 Measure the diameter where the sleeve will be positioned on an unworn portion of the shaft. Measure in three positions and average the readings (to make sure the shaft is within recommended specifications). If the mean diameter is within the range for a given sleeve size, there is sufficient press fit built into the sleeve to prevent it from sliding or spinning without using an adhesive.

3 Determine where the sleeve must be positioned to cover the seal wear track. Measure to the exact point, or mark directly on the surface. The sleeve must be placed over the worn area, not just bottomed or left flush with the end of the shaft.

4 Shallow wear grooves do not require filling. Optionally, a light layer of a non-hardening sealant, e.g. Loctite 209, can be applied to the inside diameter surface of the sleeve. Clean away sealant that migrates to the shaft or sleeve outside diameter surface.

5 If the shaft is deeply scored, fill the groove with a powdered metal epoxy type filler. Install the sleeve before the filler hardens, allowing the sleeve to wipe off any excess filler. Clean away any remaining filler from the sleeve outside diameter surface.

6 The flange end of the sleeve goes on the shaft first. Then place the installation tool over the sleeve.

7 Gently tap the center of the installation tool until the sleeve covers the seal worn surface. If the installation tool is too short, a length of pipe or tubing with a squared-off, burr-free end can be used. Be sure that the inside diameter of the pipe is the same as that of the installation tool. Use care not to scratch the precision ground sleeve outside diameter.

8 Leave the flange intact unless clearance is needed. If the flange is to be removed cut the flange perpendicular to the tear-off groove with a metal shear. Cut only into the tear-off groove, not onto the finished sleeve surface. After positioning the sleeve, use standard pliers to bend the flange back and forth around its circumference and along the shaft axis. The flange will break loose along the tear-off groove. Alternately, grasp the flange away from the seal surface and twist it into a coil.

9 After the sleeve is installed, check again for burrs, which could damage the seal.

10 Lubricate the sleeve with the system medium before installing the sleeve.

11 Proceed with the seal installation.

How to determine the size you need.

To determine the appropriate sleeve size, it is first necessary to clean the shaft carefully. The diameter of an undamaged section of the seal counterface should then be measured on at least three different planes. The arithmetical mean of these measurements determines the size of SKF Speedi-Sleeve. If the value lies within the permissible range listed in the product table for the shaft diameter, SKF Speedi-Sleeve will have an adequate tight fit on the shaft and will not require an adhesive.

Package Include : ONE SPEEDI-SLEEVE 99376

The post SKF USA 99376 ENGINE CRANKSHAFT REPAIR SPEEDI-SLEEVE 95,225×102,235×14,300mm appeared first on Rodavictoria USA.