DESCRIPTION:
Â
Â
15773
Radial shaft seal with metal case and SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a sealant-coated metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation. The seal also has a garter spring to optimize sealing against the shaft.
• For oil or grease
• With garter spring
• WAVE lip creates a higher pumping rate
• WAVE lip has less friction between shaft and lip
• WAVE lip has a lower temperature at the contact point
• Dimensions
Housing bore diameter 73.03 mm
Seal width 7.95 mm
Shaft diameter 39.7 mm
• Performance
Permissible circumferential speed 6.9 m/s
• Properties
Auxiliary lip No
Design CRW1
Metric/inches measurement system Inch
Sealing lip material Nitrile rubber (NBR)
