IKO JAPAN POS12 LA Male Rod End Bearing, 12 x 1.75mm Thread

Description:

Specifications

• MADE IN JAPAN

• Brand IKO

• Item NumberPOS12LA IKO

• Also known as SAKAC12M

• Category Rod End

Weight and Dimensions

• Inner (d) MM12,00

• Outer (D) MM33,00

• Width (B) MM16,00

• Inner (d) Inch0.4724

• Outer (D) Inch1.2992

• Width (B) Inch0.6299

• Weight (kg)0.085

Product Properties

• Seal No Seal

• Contact Material Steel on Bronze

• Product description

• The POS12LA IKO is a rod end. Rod ends consist of a housing with integral shank and a spherical plain bearing. This plain bearing is composed of an inner and outer ring without rolling elements. Rod ends are often mounted on the end of hydraulic or pneumatic cylinders. They are also used to connect two shafts. Rod ends can accommodate misalignment, and they support radial forces in a tensile or compressive direction.

• The POS12LA IKO has a spherical plain bearing with a steel-on-bronze sliding contact. The steel inner ring contacts the bronze surface of the outer ring. The steel-on-bronze sliding contact makes this bearing highly wear-resistant, providing low friction. However, the load capacity is slightly lower compared to spherical plain bearings with steel-on-steel sliding contacts. This bearing needs regular maintenance. Proper lubrication is required to reduce friction and prevent fouling and corrosion.

Package Includes: 

One (1) IKO JAPAN POS12 LA Male Rod End Bearing