Description:
6309 ZZ Nachi Bearing, Made in Japan, the 6309 inner diameter is 45mm, the 6309 outer diameter is 100mm and the 6309 width is 25mm.
Item: 6309 ZZ Nachi Ball Bearing
Type: Nachi Deep groove Ball Bearing
Radial Clearance: normal clearance
Dimensions: 45mm x 100mm x 25mm/Metric
ID (inner diameter)/Bore: 45mm
OD (outer diameter): 100mm
Width/Height/thickness: 25mm
Size: 45 x 100 x 25 mm
Quantity: One Bearing
Dynamic load rating Cr: 53,000 N
Static load rating Cor: 32,000 N
Limiting Speed:
Grease Lubrication: 7,000 RPM
Oil Lubrication: 8,200 RPM
Made in Japan
Nachi Deep Groove Ball Bearings
Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements. The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders). Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation. Deep Groove ball bearings having an outside diameter less than 9 mm are known as Miniature ball bearings. Deep Groove ball bearings having an outside diameter => 9 mm and a bore diameter < 10 mm are known as Extra-small ball bearings. Standard ball retainers (cages) are made from pressed steel. Machined cages are used in bearing operating at very high speed or for large diameter bearings. Deep groove ball bearings with seals or shields are standardized. They contain proper amount of grease in advance.
Package Includes :
One (1) BEARING 6309 ZZÂ NACHI.
