Description:
ÂSpecifications
• MADE IN AUSTRIA
• Brand SKF
• Item Number 3210A-2RS1/MT33 SKF
• Also known as 3210-2RSR
3210A-2RS1
• EAN7316571821825
• Category Angular Contact Ball Bearing Double Row
Weight and Dimensions
• Inner (d) MM50
• Outer (D) MM90
• Width (B) MM30,2
• Inner (d) Inch1.9685
• Outer (D) Inch3.5433
• Width (B) Inch1.189
• Weight (kg)0.673
Product Properties
• Bore C – Cylindrical Bore
• Seal2RS – Rubber Seal on Two Sides
• Cage Type S – Steel or Standard Cage
• External Modification No External Modification
• Radial Internal Play Cn Normal Internal Play
• Precision Standard Precision
• Lubrication M – Grease with Lithium Thickener
• Heat Stabilization No Heat Stabilization – Temperatures up to 120 °C
• Split Inner ring / Outer ring Standard
Suffix description
• A Double Row Angular Contact Ball Bearing Without Filling Slots
• 2RS1Sheet Steel Reinforced Contact Seal Of Acrylonitrile-Butadiene Rubber (NBR) On Both Sides Of The Bearing
• MT33Lithium Grease, Medium Temp. 74 cSt @ 40°C, -30°C/+120°C, A Two-Figure Number Following MT Identifies The Actual Grease. An Additional Letter Or Letter/Figure Combination As Mentioned Under “HT” Identifies Filling Degrees Other Than Standard. Examples: MT33 Or MT37F9
Product description
The 3210A-2RS1/MT33 SKF is a double-row angular contact ball bearing with solid inner- and outer rings. The design of this bearing type resembles two single-row angular contact ball bearings in O-arrangement but is slightly narrower. Double-row angular contact ball bearings can support high radial forces and axial forces in both directions. The greater the contact angle, the greater the axial load capacity of the bearing.
Suffix description
• A Double Row Angular Contact Ball Bearing Without Filling Slots
• 2RS1Sheet Steel Reinforced Contact Seal Of Acrylonitrile-Butadiene Rubber (NBR) On Both Sides Of The Bearing
• MT33Lithium Grease, Medium Temp. 74 cSt @ 40°C, -30°C/+120°C, A Two-Figure Number Following MT Identifies The Actual Grease. An Additional Letter Or Letter/Figure Combination As Mentioned Under “HT” Identifies Filling Degrees Other Than Standard. Examples: MT33 Or MT37F9
Product description
The 3210A-2RS1/MT33 SKF is a double-row angular contact ball bearing with solid inner- and outer rings. The design of this bearing type resembles two single-row angular contact ball bearings in O-arrangement but is slightly narrower. Double-row angular contact ball bearings can support high radial forces and axial forces in both directions. The greater the contact angle, the greater the axial load capacity of the bearing.
Package Includes:
One (1) Bearing SKF 3210 A 2RS1/MT33
