Description:
- Brand SKF
- Item Number 3310A-2RS1/C3MT33 SKF
- Also known as3310A-2RS1/C3
- EAN7316571510736
- Category Angular Contact Ball Bearing Double Row
Weight and Dimensions
- Inner (d) MM50
- Outer (D) MM110
- Width (B) MM44,4
- Inner (d) Inch1.9685
- Outer (D) Inch4.3307
- Width (B) Inch1.748
- Weight (kg)1.711
Product Properties
- BoreC – Cylindrical Bore
- Seal2RS – Rubber Seal on Two Sides
- Cage TypeS – Steel or Standard Cage
- External ModificationNo External Modification
- Radial Internal PlayC3 Internal Play (Higher than Cn)
- PrecisionStandard Precision
- LubricationM – Grease with Lithium Thickener
- Heat StabilizationNo Heat Stabilization – Temperatures up to 120 °C
- Split Inner ring / Outer ringStandard
Suffix description
- ADouble Row Angular Contact Ball Bearing Without Filling Slots
- 2RS1Sheet Steel Reinforced Contact Seal Of Acrylonitrile-Butadiene Rubber (NBR) On Both Sides Of The Bearing
- C3Internal Clearance Larger Than Normal
- MT33Lithium Grease, Medium Temp. 74 cSt @ 40°C, -30°C/+120°C, A Two-Figure Number Following MT Identifies The Actual Grease. An Additional Letter Or Letter/Figure Combination As Mentioned Under “HT” Identifies Filling Degrees Other Than Standard. Examples: MT33 Or MT37F9
Product description
The 3310A-2RS1/C3MT33 SKF is a double-row angular contact ball bearing with solid inner- and outer rings. The design of this bearing type resembles two single-row angular contact ball bearings in O-arrangement but is slightly narrower. Double-row angular contact ball bearings can support high radial forces and axial forces in both directions. The greater the contact angle, the greater the axial load capacity of the bearing.
Package Includes:
One (1) bearing SKF 3310 A 2RS1 C3MT33
