Description:
Single row deep groove ball bearing 25mm inside x 62mm outside x 17mm width
Single row deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. They are of a simple design, robust in operation and easy to maintain. They are available in open and sealed designs. Due to the raceway geometry and the use of balls, deep groove ball bearings can support axial forces in both directions as well as radial forces.
Deep groove ball bearings of Generation C were specially developed with a focus on low noise levels and low frictional torque. They are particularly suitable, for example, for use in electrical machinery, ventilators, washing machines and power tools.
Principal Dimensions
Inside diameter: 25mm
Outside diameter: 62mm
Width: 17mm
Basic Load Ratings
Dynamic: 23.4kn
Static: 11.6kn
Speed Ratings
Reference speed: 24000 r/min
Limiting speed: 16000 r/min
SIZE: 25X 62X 17 mm
 25mm ball bearing that is found in many applications. The ball bearing has two contact rubber seals one on each side of the ball bearing. Ball bearing has two non-contact metal shields one on each side of the ball bearing. If your application requires a ball bearing with only one seal or shield you can get this ball bearing and take one of the shields or seals off. This 25mm ball bearing is high quality and can take electric motor demands if needed.
Package Include : TWO BEARING ZEN
